Cocos2d-x3.2的渲染流程

发表于2015-07-31

第一,渲染流程从2.x到3.x的变化。

在2.x中，渲染过程是通过递归渲染树(Rendering tree)这种图关系来渲染关系图。递归调用visit()函数，并且在visit()函数中调用该节点的draw函数渲染各个节点，此时draw函数的作用是直接调用OpenGL代码进行图形的渲染。由于visit()和draw函数都是虚函数，所以要注意执行时的多态。那么我们来看看2.x版本中CCSprite的draw函数，如代码1。

代码1：

[cpp] view plain copy print ?

//这是cocos2d-2.0-x-2.0.4版本的CCSprite的draw函数
void CCSprite::draw(void)
{
CC_PROFILER_START_CATEGORY(kCCProfilerCategorySprite, "CCSprite - draw");
CCAssert(!m_pobBatchNode, "If CCSprite is being rendered by CCSpriteBatchNode, CCSprite#draw SHOULD NOT be called");
CC_NODE_DRAW_SETUP();
ccGLBlendFunc( m_sBlendFunc.src, m_sBlendFunc.dst );
if (m_pobTexture != NULL)
{
ccGLBindTexture2D( m_pobTexture->getName() );
}
else
{
ccGLBindTexture2D(0);
}
//
// Attributes
//
ccGLEnableVertexAttribs( kCCVertexAttribFlag_PosColorTex );
#define kQuadSize sizeof(m_sQuad.bl)
long offset = (long)&m_sQuad;
// vertex
int diff = offsetof( ccV3F_C4B_T2F, vertices);
glVertexAttribPointer(kCCVertexAttrib_Position, 3, GL_FLOAT, GL_FALSE, kQuadSize, (void*) (offset + diff));
// texCoods
diff = offsetof( ccV3F_C4B_T2F, texCoords);
glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, kQuadSize, (void*)(offset + diff));
// color
diff = offsetof( ccV3F_C4B_T2F, colors);
glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_UNSIGNED_BYTE, GL_TRUE, kQuadSize, (void*)(offset + diff));
glDrawArrays(GL_TRIANGLE_STRIP, 0, 4);
CHECK_GL_ERROR_DEBUG();
#if CC_SPRITE_DEBUG_DRAW == 1
// draw bounding box
CCPoint vertices[4]={
ccp(m_sQuad.tl.vertices.x,m_sQuad.tl.vertices.y),
ccp(m_sQuad.bl.vertices.x,m_sQuad.bl.vertices.y),
ccp(m_sQuad.br.vertices.x,m_sQuad.br.vertices.y),
ccp(m_sQuad.tr.vertices.x,m_sQuad.tr.vertices.y),
};
ccDrawPoly(vertices, 4, true);
#elif CC_SPRITE_DEBUG_DRAW == 2
// draw texture box
CCSize s = this->getTextureRect().size;
CCPoint offsetPix = this->getOffsetPosition();
CCPoint vertices[4] = {
ccp(offsetPix.x,offsetPix.y), ccp(offsetPix.x+s.width,offsetPix.y),
ccp(offsetPix.x+s.width,offsetPix.y+s.height), ccp(offsetPix.x,offsetPix.y+s.height)
};
ccDrawPoly(vertices, 4, true);
#endif // CC_SPRITE_DEBUG_DRAW
CC_INCREMENT_GL_DRAWS(1);
CC_PROFILER_STOP_CATEGORY(kCCProfilerCategorySprite, "CCSprite - draw");
}

//这是cocos2d-2.0-x-2.0.4版本的CCSprite的draw函数
void CCSprite::draw(void)
{
    CC_PROFILER_START_CATEGORY(kCCProfilerCategorySprite, "CCSprite - draw");
    CCAssert(!m_pobBatchNode, "If CCSprite is being rendered by CCSpriteBatchNode, CCSprite#draw SHOULD NOT be called");
    CC_NODE_DRAW_SETUP();
    ccGLBlendFunc( m_sBlendFunc.src, m_sBlendFunc.dst );
    if (m_pobTexture != NULL)
    {
        ccGLBindTexture2D( m_pobTexture->getName() );
    }
    else
    {
        ccGLBindTexture2D(0);
    }  
    //
    // Attributes
    //
    ccGLEnableVertexAttribs( kCCVertexAttribFlag_PosColorTex );
#define kQuadSize sizeof(m_sQuad.bl)
    long offset = (long)&m_sQuad;
    // vertex
    int diff = offsetof( ccV3F_C4B_T2F, vertices);
    glVertexAttribPointer(kCCVertexAttrib_Position, 3, GL_FLOAT, GL_FALSE, kQuadSize, (void*) (offset + diff));
    // texCoods
    diff = offsetof( ccV3F_C4B_T2F, texCoords);
    glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, kQuadSize, (void*)(offset + diff));
    // color
    diff = offsetof( ccV3F_C4B_T2F, colors);
    glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_UNSIGNED_BYTE, GL_TRUE, kQuadSize, (void*)(offset + diff));
    glDrawArrays(GL_TRIANGLE_STRIP, 0, 4);
    CHECK_GL_ERROR_DEBUG();
#if CC_SPRITE_DEBUG_DRAW == 1
    // draw bounding box
    CCPoint vertices[4]={
        ccp(m_sQuad.tl.vertices.x,m_sQuad.tl.vertices.y),
        ccp(m_sQuad.bl.vertices.x,m_sQuad.bl.vertices.y),
        ccp(m_sQuad.br.vertices.x,m_sQuad.br.vertices.y),
        ccp(m_sQuad.tr.vertices.x,m_sQuad.tr.vertices.y),
    };
    ccDrawPoly(vertices, 4, true);
#elif CC_SPRITE_DEBUG_DRAW == 2
    // draw texture box
    CCSize s = this->getTextureRect().size;
    CCPoint offsetPix = this->getOffsetPosition();
    CCPoint vertices[4] = {
        ccp(offsetPix.x,offsetPix.y), ccp(offsetPix.x+s.width,offsetPix.y),
        ccp(offsetPix.x+s.width,offsetPix.y+s.height), ccp(offsetPix.x,offsetPix.y+s.height)
    };
    ccDrawPoly(vertices, 4, true);
#endif // CC_SPRITE_DEBUG_DRAW
    CC_INCREMENT_GL_DRAWS(1);
    CC_PROFILER_STOP_CATEGORY(kCCProfilerCategorySprite, "CCSprite - draw");
}

那么我们也看看3.x中Sprite的draw函数，如代码2。

代码2：

[cpp] view plain copy print ?

void Sprite::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
// Don't do calculate the culling if the transform was not updated
_insideBounds = (flags & FLAGS_TRANSFORM_DIRTY) ? renderer->checkVisibility(transform, _contentSize) : _insideBounds;
if(_insideBounds)
{
_quadCommand.init(_globalZOrder, _texture->getName(), getGLProgramState(), _blendFunc, &_quad, 1, transform);
renderer->addCommand(&_quadCommand);
#if CC_SPRITE_DEBUG_DRAW
_customDebugDrawCommand.init(_globalZOrder);
_customDebugDrawCommand.func = CC_CALLBACK_0(Sprite::drawDebugData, this);
renderer->addCommand(&_customDebugDrawCommand);
#endif //CC_SPRITE_DEBUG_DRAW
}
}

void Sprite::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
    // Don't do calculate the culling if the transform was not updated
    _insideBounds = (flags & FLAGS_TRANSFORM_DIRTY) ? renderer->checkVisibility(transform, _contentSize) : _insideBounds;
    if(_insideBounds)
    {
        _quadCommand.init(_globalZOrder, _texture->getName(), getGLProgramState(), _blendFunc, &_quad, 1, transform);
        renderer->addCommand(&_quadCommand);
#if CC_SPRITE_DEBUG_DRAW
        _customDebugDrawCommand.init(_globalZOrder);
        _customDebugDrawCommand.func = CC_CALLBACK_0(Sprite::drawDebugData, this);
        renderer->addCommand(&_customDebugDrawCommand);
#endif //CC_SPRITE_DEBUG_DRAW
    }
}

从代码1和代码2的对比中，我们很容易就发现2.x版本中的draw函数直接调用OpengGL代码进行图形渲染,而3.x版本中draw的作用是把RenderCommand添加到CommandQueue中，至于这样做的好处是，实际的渲染API进入其中一个与显卡直接交流的有独立线程的RenderQueue。

从Cocos2d-x3.0开始，Cocos2d-x引入了新的渲染流程，它不像2.x版本直接在每一个node中的draw函数中直接调用OpenGL代码进行图形渲染，而是通过各种RenderCommand封装起来，然后添加到一个CommandQueue队列里面去，而现在draw函数的作用就是在此函数中设置好相对应的RenderCommand参数，然后把此RenderCommand添加到CommandQueue中。最后在每一帧结束时调用renderer函数进行渲染，在renderer函数中会根据ID对RenderCommand进行排序，然后才进行渲染。

下面我们来看看图1、图2，这两个图形象地表现了Cocos2d-x3.x下RenderCommand的封装与传递与及RenderCommand的排序。

图1：

图2：

上面所说的各个方面都有点零碎，下面就对渲染的整个流程来一个从头到尾的梳理吧。下面是针对3.2版本的，对于2.x版本的梳理不做梳理，因为我用的是3.2版本。

首先,我们Cocos2d-x的执行是通过Application::run()来开始的,如代码3，此代码目录中在xxcocos2dcocosplatform对应平台的目录下，这是与多平台实现有关的类，关于如何实现多平台的编译，你可以参考《cocos2d-x3.2源码分析(一）类FileUtils--实现把资源放在Resources文件目录下达到多平台的引用》中我对平台编译的分析。以防篇幅过长，只截取了重要部分，如需详解，可以直接查看源码。

代码3：

[cpp] view plain copy print ?

int Application::run()
{
...
director->mainLoop();
...
}

int Application::run()
{
  ...
  director->mainLoop();
  ...
 }

从代码3中，它明显的启发着我们要继续追寻Director::mainLoop()函数。在Director中mainLoop()为纯函数，此子类DisplayLinkDirector才有其实现，如代码4。

代码4：

[cpp] view plain copy print ?

void DisplayLinkDirector::mainLoop()
{
//只有一种情况会调用到这里来，就是导演类调用end函数
if (_purgeDirectorInNextLoop)
{
_purgeDirectorInNextLoop = false;
//清除导演类
purgeDirector();
}
else if (! _invalid)
{ //绘制
drawScene();
//清除当前内存池中对象，即池中每一个对象--_referenceCount
PoolManager::getInstance()->getCurrentPool()->clear();
}
}

void DisplayLinkDirector::mainLoop()
{   
    <span><span class="comment">//只有一种情况会调用到这里来，就是导演类调用end函数</span><span>  </span></span>
    if (_purgeDirectorInNextLoop)
    {
        _purgeDirectorInNextLoop = false;
        <span><span class="comment">//清除导演类</span><span></span></span>
        purgeDirector();
    }
    else if (! _invalid)
    {   <span><span class="comment">//绘制</span><span> </span></span>
        drawScene(); 
        //清除当前内存池中对象，即池中每一个对象--_referenceCount
        PoolManager::getInstance()->getCurrentPool()->clear();
    }
}

mainLoop是主线程调用的循环，其中drawScene()是绘制函数，接着我们继续追寻它的代码，如代码5。

代码5：

[cpp] view plain copy print ?

void Director::drawScene()
{
//计算间隔时间
calculateDeltaTime();
//忽略该帧如果时间间隔接近0
if(_deltaTime < FLT_EPSILON)
{
return;
}
if (_openGLView)
{
_openGLView->pollInputEvents();
}
//tick before glClear: issue #533
if (! _paused)
{
_scheduler->update(_deltaTime);
_eventDispatcher->dispatchEvent(_eventAfterUpdate);
}
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
/* to avoid flickr, nextScene MUST be here: after tick and before draw.
XXX: Which bug is this one. It seems that it can't be reproduced with v0.9 */
if (_nextScene)
{
setNextScene();
}
pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
// draw the scene
if (_runningScene)
{
_runningScene->visit(_renderer, Mat4::IDENTITY, false);
_eventDispatcher->dispatchEvent(_eventAfterVisit);
}
// draw the notifications node
if (_notificationNode)
{
_notificationNode->visit(_renderer, Mat4::IDENTITY, false);
}
if (_displayStats)
{
showStats();
}
_renderer->render();
_eventDispatcher->dispatchEvent(_eventAfterDraw);
popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
_totalFrames++;
// swap buffers
if (_openGLView)
{
_openGLView->swapBuffers();
}
if (_displayStats)
{
calculateMPF();
}
}

void Director::drawScene()
{
    <span><span class="comment">//计算间隔时间</span><span> </span></span>
    calculateDeltaTime();
    //忽略该帧如果时间间隔接近0
    if(_deltaTime < FLT_EPSILON)
    {
        return;
    }
    if (_openGLView)
    {
        _openGLView->pollInputEvents();
    }
    //tick before glClear: issue #533
    if (! _paused)
    {
        _scheduler->update(_deltaTime);
        _eventDispatcher->dispatchEvent(_eventAfterUpdate);
    }
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    /* to avoid flickr, nextScene MUST be here: after tick and before draw.
     XXX: Which bug is this one. It seems that it can't be reproduced with v0.9 */
    if (_nextScene)
    {
        setNextScene();
    }
    pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    // draw the scene
    if (_runningScene)
    {
        _runningScene->visit(_renderer, Mat4::IDENTITY, false);
        _eventDispatcher->dispatchEvent(_eventAfterVisit);
    }
    // draw the notifications node
    if (_notificationNode)
    {
        _notificationNode->visit(_renderer, Mat4::IDENTITY, false);
    }
    if (_displayStats)
    {
        showStats();
    }
    _renderer->render();
    _eventDispatcher->dispatchEvent(_eventAfterDraw);
    popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    _totalFrames++;
    // swap buffers
    if (_openGLView)
    {
        _openGLView->swapBuffers();
    }
    if (_displayStats)
    {
        calculateMPF();
    }
}

从代码5中，我们看见visit()和render()函数的调用。其中visit()函数会调用draw()函数来向RenderQueue中添加RenderCommand,那么就继续追寻visit()的代码，如代码6。

代码6：

[cpp] view plain copy print ?

void Node::visit(Renderer* renderer, const Mat4 &parentTransform, uint32_t parentFlags)
{
// quick return if not visible. children won't be drawn.
if (!_visible)
{
return;
}
uint32_t flags = processParentFlags(parentTransform, parentFlags);
// IMPORTANT:
// To ease the migration to v3.0, we still support the Mat4 stack,
// but it is deprecated and your code should not rely on it
Director* director = Director::getInstance();
director->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
director->loadMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW, _modelViewTransform);
int i = 0;
if(!_children.empty())
{
sortAllChildren();
// draw children zOrder < 0
for( ; i < _children.size(); i++ )
{
auto node = _children.at(i);
if ( node && node->_localZOrder < 0 )
node->visit(renderer, _modelViewTransform, flags);
else
break;
}
// self draw
this->draw(renderer, _modelViewTransform, flags);
for(auto it=_children.cbegin()+i; it != _children.cend(); ++it)
(*it)->visit(renderer, _modelViewTransform, flags);
}
else
{
this->draw(renderer, _modelViewTransform, flags);
}
director->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
// FIX ME: Why need to set _orderOfArrival to 0??
// Please refer to https://github.com/cocos2d/cocos2d-x/pull/6920
// reset for next frame
// _orderOfArrival = 0;
}

void Node::visit(Renderer* renderer, const Mat4 &parentTransform, uint32_t parentFlags)
{
    // quick return if not visible. children won't be drawn.
    if (!_visible)
    {
        return;
    }
    uint32_t flags = processParentFlags(parentTransform, parentFlags);
    // IMPORTANT:
    // To ease the migration to v3.0, we still support the Mat4 stack,
    // but it is deprecated and your code should not rely on it
    Director* director = Director::getInstance();
    director->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    director->loadMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW, _modelViewTransform);
    int i = 0;
    if(!_children.empty())
    {
        sortAllChildren();
        // draw children zOrder < 0
        for( ; i < _children.size(); i++ )
        {
            auto node = _children.at(i);
            if ( node && node->_localZOrder < 0 )
                node->visit(renderer, _modelViewTransform, flags);
            else
                break;
        }
        // self draw
        this->draw(renderer, _modelViewTransform, flags);
        for(auto it=_children.cbegin()+i; it != _children.cend(); ++it)
            (*it)->visit(renderer, _modelViewTransform, flags);
    }
    else
    {
        this->draw(renderer, _modelViewTransform, flags);
    }
    director->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    // FIX ME: Why need to set _orderOfArrival to 0??
    // Please refer to https://github.com/cocos2d/cocos2d-x/pull/6920
    // reset for next frame
    // _orderOfArrival = 0;
}

从代码6中，我们可以看到“ auto node = _children.at(i)；和node->visit(renderer, _modelViewTransform, flags);”，这段代码的意思是先获取子节点，然后递归调用节点的visit()函数，到了没有子节点的节点，开始调用draw()函数。那么我们看看draw()函数代码，如代码7。

代码7：

[cpp] view plain copy print ?

void Node::draw(Renderer* renderer, const Mat4 &transform, uint32_t flags)
{
}

void Node::draw(Renderer* renderer, const Mat4 &transform, uint32_t flags)
{
}

好吧，从代码7中，我们看到Node的draw什么都没有做，是我们找错地方？原来draw()是虚函数，所以它执行时执行的是该字节类的draw()函数。确实是我们找错地方了。那么我们分别看DrawNode::draw()、Sprite::draw()。

代码8：

[cpp] view plain copy print ?

void DrawNode::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
_customCommand.init(_globalZOrder);
_customCommand.func = CC_CALLBACK_0(DrawNode::onDraw, this, transform, flags);
renderer->addCommand(&_customCommand);
}
void Sprite::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
// Don't do calculate the culling if the transform was not updated
_insideBounds = (flags & FLAGS_TRANSFORM_DIRTY) ? renderer->checkVisibility(transform, _contentSize) : _insideBounds;
if(_insideBounds)
{
_quadCommand.init(_globalZOrder, _texture->getName(), getGLProgramState(), _blendFunc, &_quad, 1, transform);
renderer->addCommand(&_quadCommand);
#if CC_SPRITE_DEBUG_DRAW
_customDebugDrawCommand.init(_globalZOrder);
_customDebugDrawCommand.func = CC_CALLBACK_0(Sprite::drawDebugData, this);
renderer->addCommand(&_customDebugDrawCommand);
#endif //CC_SPRITE_DEBUG_DRAW
}
}

void DrawNode::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
    _customCommand.init(_globalZOrder);
    _customCommand.func = CC_CALLBACK_0(DrawNode::onDraw, this, transform, flags);
    renderer->addCommand(&_customCommand);
}
void Sprite::draw(Renderer *renderer, const Mat4 &transform, uint32_t flags)
{
    // Don't do calculate the culling if the transform was not updated
    _insideBounds = (flags & FLAGS_TRANSFORM_DIRTY) ? renderer->checkVisibility(transform, _contentSize) : _insideBounds;
    if(_insideBounds)
    {
        _quadCommand.init(_globalZOrder, _texture->getName(), getGLProgramState(), _blendFunc, &_quad, 1, transform);
        renderer->addCommand(&_quadCommand);
#if CC_SPRITE_DEBUG_DRAW
        _customDebugDrawCommand.init(_globalZOrder);
        _customDebugDrawCommand.func = CC_CALLBACK_0(Sprite::drawDebugData, this);
        renderer->addCommand(&_customDebugDrawCommand);
#endif //CC_SPRITE_DEBUG_DRAW
    }
}

从代码8中，我们可以看到在draw()函数向RenderQueue中添加RenderCommand,当然有的类的draw()不是向RenderQueue中添加RenderCommand，而是直接使用OpenGL的API直接进行渲染，或者做一些其他的事情。

那么当draw()都递归调用完了，我们来看看最后进行渲染的Renderer::render() 函数，如代码9。

代码9：

[cpp] view plain copy print ?

void Renderer::render()
{
//Uncomment this once everything is rendered by new renderer
//glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
//TODO setup camera or MVP
_isRendering = true;
if (_glViewAssigned)
{
// cleanup
_drawnBatches = _drawnVertices = 0;
//Process render commands
//1. Sort render commands based on ID
for (auto &renderqueue : _renderGroups)
{
renderqueue.sort();
}
visitRenderQueue(_renderGroups[0]);
flush();
}
clean();
_isRendering = false;
}

void Renderer::render()
{
    //Uncomment this once everything is rendered by new renderer
    //glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    //TODO setup camera or MVP
    _isRendering = true;
    if (_glViewAssigned)
    {
        // cleanup
        _drawnBatches = _drawnVertices = 0;
        //Process render commands
        //1. Sort render commands based on ID
        for (auto &renderqueue : _renderGroups)
        {
            renderqueue.sort();
        }
        visitRenderQueue(_renderGroups[0]);
        flush();
    }
    clean();
    _isRendering = false;
}

从代码9中，我们看到“renderqueue.sort()"，这是之前所说的对命令先排序，然后才进行渲染，“visitRenderQueue( _renderGroups[0])”就是来进行渲染的。那么我们接着看看void Renderer::visitRenderQueue(const RenderQueue& queue)的代码，如代码10。

代码10：

[cpp] view plain copy print ?

void Renderer::visitRenderQueue(const RenderQueue& queue)
{
ssize_t size = queue.size();
for (ssize_t index = 0; index < size; ++index)
{
auto command = queue[index];
auto commandType = command->getType();
if(RenderCommand::Type::QUAD_COMMAND == commandType)
{
flush3D();
auto cmd = static_cast<QuadCommand*>(command);
//Batch quads
if(_numQuads + cmd->getQuadCount() > VBO_SIZE)
{
CCASSERT(cmd->getQuadCount()>= 0 && cmd->getQuadCount() < VBO_SIZE, "VBO is not big enough for quad data, please break the quad data down or use customized render command");
//Draw batched quads if VBO is full
drawBatchedQuads();
}
_batchedQuadCommands.push_back(cmd);
memcpy(_quads + _numQuads, cmd->getQuads(), sizeof(V3F_C4B_T2F_Quad) * cmd->getQuadCount());
convertToWorldCoordinates(_quads + _numQuads, cmd->getQuadCount(), cmd->getModelView());
_numQuads += cmd->getQuadCount();
}
else if(RenderCommand::Type::GROUP_COMMAND == commandType)
{
flush();
int renderQueueID = ((GroupCommand*) command)->getRenderQueueID();
visitRenderQueue(_renderGroups[renderQueueID]);
}
else if(RenderCommand::Type::CUSTOM_COMMAND == commandType)
{
flush();
auto cmd = static_cast<CustomCommand*>(command);
cmd->execute();
}
else if(RenderCommand::Type::BATCH_COMMAND == commandType)
{
flush();
auto cmd = static_cast<BatchCommand*>(command);
cmd->execute();
}
else if (RenderCommand::Type::MESH_COMMAND == commandType)
{
flush2D();
auto cmd = static_cast<MeshCommand*>(command);
if (_lastBatchedMeshCommand == nullptr || _lastBatchedMeshCommand->getMaterialID() != cmd->getMaterialID())
{
flush3D();
cmd->preBatchDraw();
cmd->batchDraw();
_lastBatchedMeshCommand = cmd;
}
else
{
cmd->batchDraw();
}
}
else
{
CCLOGERROR("Unknown commands in renderQueue");
}
}
}

void Renderer::visitRenderQueue(const RenderQueue& queue)
{
    ssize_t size = queue.size();
    for (ssize_t index = 0; index < size; ++index)
    {
        auto command = queue[index];
        auto commandType = command->getType();
        if(RenderCommand::Type::QUAD_COMMAND == commandType)
        {
            flush3D();
            auto cmd = static_cast<QuadCommand*>(command);
            //Batch quads
            if(_numQuads + cmd->getQuadCount() > VBO_SIZE)
            {
                CCASSERT(cmd->getQuadCount()>= 0 && cmd->getQuadCount() < VBO_SIZE, "VBO is not big enough for quad data, please break the quad data down or use customized render command");
                //Draw batched quads if VBO is full
                drawBatchedQuads();
            }
            _batchedQuadCommands.push_back(cmd);
            memcpy(_quads + _numQuads, cmd->getQuads(), sizeof(V3F_C4B_T2F_Quad) * cmd->getQuadCount());
            convertToWorldCoordinates(_quads + _numQuads, cmd->getQuadCount(), cmd->getModelView());
            _numQuads += cmd->getQuadCount();
        }
        else if(RenderCommand::Type::GROUP_COMMAND == commandType)
        {
            flush();
            int renderQueueID = ((GroupCommand*) command)->getRenderQueueID();
            visitRenderQueue(_renderGroups[renderQueueID]);
        }
        else if(RenderCommand::Type::CUSTOM_COMMAND == commandType)
        {
            flush();
            auto cmd = static_cast<CustomCommand*>(command);
            cmd->execute();
        }
        else if(RenderCommand::Type::BATCH_COMMAND == commandType)
        {
            flush();
            auto cmd = static_cast<BatchCommand*>(command);
            cmd->execute();
        }
        else if (RenderCommand::Type::MESH_COMMAND == commandType)
        {
            flush2D();
            auto cmd = static_cast<MeshCommand*>(command);
            if (_lastBatchedMeshCommand == nullptr || _lastBatchedMeshCommand->getMaterialID() != cmd->getMaterialID())
            {
                flush3D();
                cmd->preBatchDraw();
                cmd->batchDraw();
                _lastBatchedMeshCommand = cmd;
            }
            else
            {
                cmd->batchDraw();
            }
        }
        else
        {
            CCLOGERROR("Unknown commands in renderQueue");
        }
    }
}

从代码10中，我们看到RenderCommand类型有QUAD_COMMAND,CUSTOM_COMMAND,BATCH_COMMAND,

GROUP_COMMAND,MESH_COMMAND五种，这些类型的讲解在下一节。

从代码10中，好像没有与OpenGL相关的代码，有点囧。其实这OpenGL的API调用是在Renderer::drawBatched

Quads()、BatchCommand::execute()中。在代码10中，我们也看到在QUAD_COMMAND类型中调用了drawBatchedQuads()，如代码11。在CUSTOM_COMMAND中调用了CustomCommand::execute()，如代码12。在BATCH_COMMAND中调用了BatchCommand::execute()，如代码13。在MESH_COMMAND类型中调用了MeshCommand::preBatchDraw()和MeshCommand::batchDraw()。至于GROUP_COMMAND类型，就递归它组里的成员。

代码11：

[cpp] view plain copy print ?

void Renderer::drawBatchedQuads()
{
//TODO we can improve the draw performance by insert material switching command before hand.
int quadsToDraw = 0;
int startQuad = 0;
//Upload buffer to VBO
if(_numQuads <= 0 || _batchedQuadCommands.empty())
{
return;
}
if (Configuration::getInstance()->supportsShareableVAO())
{
//Set VBO data
glBindBuffer(GL_ARRAY_BUFFER, _buffersVBO[0]);
// option 1: subdata
// glBufferSubData(GL_ARRAY_BUFFER, sizeof(_quads[0])*start, sizeof(_quads[0]) * n , &_quads[start] );
// option 2: data
// glBufferData(GL_ARRAY_BUFFER, sizeof(quads_[0]) * (n-start), &quads_[start], GL_DYNAMIC_DRAW);
// option 3: orphaning + glMapBuffer
glBufferData(GL_ARRAY_BUFFER, sizeof(_quads[0]) * (_numQuads), nullptr, GL_DYNAMIC_DRAW);
void *buf = glMapBuffer(GL_ARRAY_BUFFER, GL_WRITE_ONLY);
memcpy(buf, _quads, sizeof(_quads[0])* (_numQuads));
glUnmapBuffer(GL_ARRAY_BUFFER);
glBindBuffer(GL_ARRAY_BUFFER, 0);
//Bind VAO
GL::bindVAO(_quadVAO);
}
else
{
#define kQuadSize sizeof(_quads[0].bl)
glBindBuffer(GL_ARRAY_BUFFER, _buffersVBO[0]);
glBufferData(GL_ARRAY_BUFFER, sizeof(_quads[0]) * _numQuads , _quads, GL_DYNAMIC_DRAW);
GL::enableVertexAttribs(GL::VERTEX_ATTRIB_FLAG_POS_COLOR_TEX);
// vertices
glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_POSITION, 3, GL_FLOAT, GL_FALSE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, vertices));
// colors
glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_COLOR, 4, GL_UNSIGNED_BYTE, GL_TRUE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, colors));
// tex coords
glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_TEX_COORD, 2, GL_FLOAT, GL_FALSE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, texCoords));
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, _buffersVBO[1]);
}
//Start drawing verties in batch
for(const auto& cmd : _batchedQuadCommands)
{
auto newMaterialID = cmd->getMaterialID();
if(_lastMaterialID != newMaterialID || newMaterialID == QuadCommand::MATERIAL_ID_DO_NOT_BATCH)
{
//Draw quads
if(quadsToDraw > 0)
{
glDrawElements(GL_TRIANGLES, (GLsizei) quadsToDraw*6, GL_UNSIGNED_SHORT, (GLvoid*) (startQuad*6*sizeof(_indices[0])) );
_drawnBatches++;
_drawnVertices += quadsToDraw*6;
startQuad += quadsToDraw;
quadsToDraw = 0;
}
//Use new material
cmd->useMaterial();
_lastMaterialID = newMaterialID;
}
quadsToDraw += cmd->getQuadCount();
}
//Draw any remaining quad
if(quadsToDraw > 0)
{
glDrawElements(GL_TRIANGLES, (GLsizei) quadsToDraw*6, GL_UNSIGNED_SHORT, (GLvoid*) (startQuad*6*sizeof(_indices[0])) );
_drawnBatches++;
_drawnVertices += quadsToDraw*6;
}
if (Configuration::getInstance()->supportsShareableVAO())
{
//Unbind VAO
GL::bindVAO(0);
}
else
{
glBindBuffer(GL_ARRAY_BUFFER, 0);
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0);
}
_batchedQuadCommands.clear();
_numQuads = 0;

void Renderer::drawBatchedQuads()
{
    //TODO we can improve the draw performance by insert material switching command before hand.
    int quadsToDraw = 0;
    int startQuad = 0;
    //Upload buffer to VBO
    if(_numQuads <= 0 || _batchedQuadCommands.empty())
    {
        return;
    }
    if (Configuration::getInstance()->supportsShareableVAO())
    {
        //Set VBO data
        glBindBuffer(GL_ARRAY_BUFFER, _buffersVBO[0]);
        // option 1: subdata
//        glBufferSubData(GL_ARRAY_BUFFER, sizeof(_quads[0])*start, sizeof(_quads[0]) * n , &_quads[start] );
        // option 2: data
//        glBufferData(GL_ARRAY_BUFFER, sizeof(quads_[0]) * (n-start), &quads_[start], GL_DYNAMIC_DRAW);
        // option 3: orphaning + glMapBuffer
        glBufferData(GL_ARRAY_BUFFER, sizeof(_quads[0]) * (_numQuads), nullptr, GL_DYNAMIC_DRAW);
        void *buf = glMapBuffer(GL_ARRAY_BUFFER, GL_WRITE_ONLY);
        memcpy(buf, _quads, sizeof(_quads[0])* (_numQuads));
        glUnmapBuffer(GL_ARRAY_BUFFER);
        glBindBuffer(GL_ARRAY_BUFFER, 0);
        //Bind VAO
        GL::bindVAO(_quadVAO);
    }
    else
    {
#define kQuadSize sizeof(_quads[0].bl)
        glBindBuffer(GL_ARRAY_BUFFER, _buffersVBO[0]);
        glBufferData(GL_ARRAY_BUFFER, sizeof(_quads[0]) * _numQuads , _quads, GL_DYNAMIC_DRAW);
        GL::enableVertexAttribs(GL::VERTEX_ATTRIB_FLAG_POS_COLOR_TEX);
        // vertices
        glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_POSITION, 3, GL_FLOAT, GL_FALSE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, vertices));
        // colors
        glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_COLOR, 4, GL_UNSIGNED_BYTE, GL_TRUE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, colors));
        // tex coords
        glVertexAttribPointer(GLProgram::VERTEX_ATTRIB_TEX_COORD, 2, GL_FLOAT, GL_FALSE, kQuadSize, (GLvoid*) offsetof(V3F_C4B_T2F, texCoords));
        glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, _buffersVBO[1]);
    }
    //Start drawing verties in batch
    for(const auto& cmd : _batchedQuadCommands)
    {
        auto newMaterialID = cmd->getMaterialID();
        if(_lastMaterialID != newMaterialID || newMaterialID == QuadCommand::MATERIAL_ID_DO_NOT_BATCH)
        {
            //Draw quads
            if(quadsToDraw > 0)
            {
                glDrawElements(GL_TRIANGLES, (GLsizei) quadsToDraw*6, GL_UNSIGNED_SHORT, (GLvoid*) (startQuad*6*sizeof(_indices[0])) );
                _drawnBatches++;
                _drawnVertices += quadsToDraw*6;
                startQuad += quadsToDraw;
                quadsToDraw = 0;
            }
            //Use new material
            cmd->useMaterial();
            _lastMaterialID = newMaterialID;
        }
        quadsToDraw += cmd->getQuadCount();
    }
    //Draw any remaining quad
    if(quadsToDraw > 0)
    {
        glDrawElements(GL_TRIANGLES, (GLsizei) quadsToDraw*6, GL_UNSIGNED_SHORT, (GLvoid*) (startQuad*6*sizeof(_indices[0])) );
        _drawnBatches++;
        _drawnVertices += quadsToDraw*6;
    }
    if (Configuration::getInstance()->supportsShareableVAO())
    {
        //Unbind VAO
        GL::bindVAO(0);
    }
    else
    {
        glBindBuffer(GL_ARRAY_BUFFER, 0);
        glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0);
    }
    _batchedQuadCommands.clear();
    _numQuads = 0;

代码12：

[cpp] view plain copy print ?

void CustomCommand::execute()
{
if(func)
{
func();
}
}

void CustomCommand::execute()
{
    if(func)
    {
        func();
    }
}

代码13：

[cpp] view plain copy print ?

void BatchCommand::execute()
{
// Set material
_shader->use();
_shader->setUniformsForBuiltins(_mv);
GL::bindTexture2D(_textureID);
GL::blendFunc(_blendType.src, _blendType.dst);
// Draw
_textureAtlas->drawQuads();
}

void BatchCommand::execute()
{
    // Set material
    _shader->use();
    _shader->setUniformsForBuiltins(_mv);
    GL::bindTexture2D(_textureID);
    GL::blendFunc(_blendType.src, _blendType.dst);
    // Draw
    _textureAtlas->drawQuads();
}

从代码11、代码12、代码13中，我们都看到了这些函数中对OpenGl的API调用来进行渲染。其中特别提醒一下，在CustomCommand::execute()中直接调用的函数是我们设置的回调函数。在这个函数中，我们可以自己使用OpenGL的API进行图形的渲染。这就在第三节中讲如何在Cocos2d-x中自己设置渲染功能中向_customCommand添加的函数。在这里我先给出简便的方式，_customCommand.func = CC_CALLBACK_0(HelloWorld::onDraw, this)。

以上就是把一个完整的渲染的流程都梳理了一片，下面我给出了流程图，如图3。

图3：

第二，RenderCommand的类型。

这里的类型讲解主要参考这篇文章中关于RenderComman的类型讲解。

QUAD_COMMAND：QuadCommand类绘制精灵等。
所有绘制图片的命令都会调用到这里，处理这个类型命令的代码就是绘制贴图的openGL代码，下一篇文章会详细介绍这部分代码。
CUSTOM_COMMAND：CustomCommand类自定义绘制，自己定义绘制函数，在调用绘制时只需调用已经传进来的回调函数就可以，裁剪节点，绘制图形节点都采用这个绘制，把绘制函数定义在自己的类里。这种类型的绘制命令不会在处理命令的时候调用任何一句openGL代码，而是调用你写好并设置给func的绘制函数，后续文章会介绍引擎中的所有自定义绘制，并自己实现一个自定义的绘制。
BATCH_COMMAND：BatchCommand类批处理绘制，批处理精灵和粒子
其实它类似于自定义绘制，也不会再render函数中出现任何一句openGL函数，它调用一个固定的函数，这个函数会在下一篇文章中介绍。
GROUP_COMMAND：GroupCommand类绘制组，一个节点包括两个以上绘制命令的时候，把这个绘制命令存储到另外一个_renderGroups中的元素中，并把这个元素的指针作为一个节点存储到_renderGroups[0]中。

第三，如何在Cocos2d-x中自己设置渲染功能。

1.第一种方法针对的是整个图层的渲染。

重写visit()函数，并且在visit()函数中直接向CommandQueue添加CustomCommand，设置好回调函数，这个比较直接，如代码14，代码14是子龙山人《基于Cocos2d-x学习OpenGL ES 2.0》第一篇中的部分代码。或者重写draw()函数，并且在draw()函数中向CommandQueue添加CustomCommand，设置好回调函数，这个就比较按照正规的流程走。

代码14：

[cpp] view plain copy print ?

void HelloWorld::visit(cocos2d::Renderer *renderer, const Mat4 &transform, bool transformUpdated)
{
Layer::draw(renderer, transform, transformUpdated);
//send custom command to tell the renderer to call opengl commands
_customCommand.init(_globalZOrder);
_customCommand.func = CC_CALLBACK_0(HelloWorld::onDraw, this);
renderer->addCommand(&_customCommand);
}
void HelloWorld::onDraw()
{
//question1: why the triangle goes to the up side
//如果使用对等矩阵，则三角形绘制会在最前面
Director::getInstance()->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
Director::getInstance()->loadIdentityMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
Director::getInstance()->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);
Director::getInstance()->loadIdentityMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);
auto glProgram = getGLProgram();
glProgram->use();
//set uniform values, the order of the line is very important
glProgram->setUniformsForBuiltins();
auto size = Director::getInstance()->getWinSize();
//use vao
glBindVertexArray(vao);
GLuint uColorLocation = glGetUniformLocation(glProgram->getProgram(), "u_color");
float uColor[] = {1.0, 1.0, 1.0, 1.0};
glUniform4fv(uColorLocation,1, uColor);
// glDrawArrays(GL_TRIANGLES, 0, 6);
glDrawElements(GL_TRIANGLES, 6, GL_UNSIGNED_BYTE,(GLvoid*)0);
glBindVertexArray(0);
CC_INCREMENT_GL_DRAWN_BATCHES_AND_VERTICES(1, 6);
CHECK_GL_ERROR_DEBUG();
Director::getInstance()->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);
Director::getInstance()->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
}

void HelloWorld::visit(cocos2d::Renderer *renderer, const Mat4 &transform, bool transformUpdated)
{
    Layer::draw(renderer, transform, transformUpdated);
    //send custom command to tell the renderer to call opengl commands
    _customCommand.init(_globalZOrder);
    _customCommand.func = CC_CALLBACK_0(HelloWorld::onDraw, this);
    renderer->addCommand(&_customCommand);
}
void HelloWorld::onDraw()
{
    //question1: why the triangle goes to the up side
    //如果使用对等矩阵，则三角形绘制会在最前面
    Director::getInstance()->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    Director::getInstance()->loadIdentityMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
    Director::getInstance()->pushMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);
    Director::getInstance()->loadIdentityMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);
    auto glProgram = getGLProgram();
    glProgram->use();
    //set uniform values, the order of the line is very important
    glProgram->setUniformsForBuiltins();
    auto size = Director::getInstance()->getWinSize();
    //use vao
    glBindVertexArray(vao);
    GLuint uColorLocation = glGetUniformLocation(glProgram->getProgram(), "u_color");
    float uColor[] = {1.0, 1.0, 1.0, 1.0};
    glUniform4fv(uColorLocation,1, uColor);   
//  glDrawArrays(GL_TRIANGLES, 0, 6);
    glDrawElements(GL_TRIANGLES, 6, GL_UNSIGNED_BYTE,(GLvoid*)0);  
    glBindVertexArray(0); 
    CC_INCREMENT_GL_DRAWN_BATCHES_AND_VERTICES(1, 6);
    CHECK_GL_ERROR_DEBUG();  
    Director::getInstance()->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_PROJECTION);   
    Director::getInstance()->popMatrix(MATRIX_STACK_TYPE::MATRIX_STACK_MODELVIEW);
}

从代码14中，我们看到重写visit()函数，在visit()函数中直接向RenderQueue添加RenderCommand,即“renderer->addCommand(&_customCommand);”，由于此RenderCommand类型为CustomCommand,所以要添加处理图形渲染的回调函数，即“_customCommand.func = CC_CALLBACK_0(HelloWorld::onDraw, this);”，这行代码就是添加回调函数的，onDraw()函数中调用OpengGL的API渲染图形。关于func是如何被调用，可以参考上面的代码12上下文的分析。

2.第二种方法针对个别精灵。

有时候，我们只要对个别精灵进行特效的处理，这个精灵需要使用我们自己编写的Shader，而图层其他的元素按默认处理就行了。这时候就需要第二种方法了。设置好Shader,向精灵添加Shader，最后在重写draw函数，在draw函数中进行特效的处理，如代码15，代码15是《捕鱼达人3》教程第二节的代码。

代码15：

[cpp] view plain copy print ?

bool FishLayer::init()
{
...省略了不相关的代码。
// 将vsh与fsh装配成一个完整的Shader文件。
auto glprogram = GLProgram::createWithFilenames("UVAnimation.vsh", "UVAnimation.fsh");
// 由Shader文件创建这个Shader
auto glprogramstate = GLProgramState::getOrCreateWithGLProgram(glprogram);
// 给精灵设置所用的Shader
m_Sprite->setGLProgramState(glprogramstate);
//创建海龟所用的贴图。
auto textrue1 = Director::getInstance()->getTextureCache()->addImage("tortoise.png");
//将贴图设置给Shader中的变量值u_texture1
glprogramstate->setUniformTexture("u_texture1", textrue1);
//创建波光贴图。
auto textrue2 = Director::getInstance()->getTextureCache()->addImage("caustics.png");
//将贴图设置给Shader中的变量值u_lightTexture
glprogramstate->setUniformTexture("u_lightTexture", textrue2);
//注意，对于波光贴图，我们希望它在进行UV动画时能产生四方连续效果，必须设置它的纹理UV寻址方式为GL_REPEAT。
Texture2D::TexParams tRepeatParams;
tRepeatParams.magFilter = GL_LINEAR_MIPMAP_LINEAR;
tRepeatParams.minFilter = GL_LINEAR;
tRepeatParams.wrapS = GL_REPEAT;
tRepeatParams.wrapT = GL_REPEAT;
textrue2->setTexParameters(tRepeatParams);
//在这里，我们设置一个波光的颜色，这里设置为白色。
Vec4 tLightColor(1.0,1.0,1.0,1.0);
glprogramstate->setUniformVec4("v_LightColor",tLightColor);
//下面这一段，是为了将我们自定义的Shader与我们的模型顶点组织方式进行匹配。模型的顶点数据一般包括位置，法线，色彩，纹理，以及骨骼绑定信息。而Shader需要将内部相应的顶点属性通道与模型相应的顶点属性数据进行绑定才能正确显示出顶点。
long offset = 0;
auto attributeCount = m_Sprite->getMesh()->getMeshVertexAttribCount();
for (auto k = 0; k < attributeCount; k++) {
auto meshattribute = m_Sprite->getMesh()->getMeshVertexAttribute(k);
glprogramstate->setVertexAttribPointer(s_attributeNames[meshattribute.vertexAttrib],
meshattribute.size,
meshattribute.type,
GL_FALSE,
m_Sprite->getMesh()->getVertexSizeInBytes(),
(GLvoid*)offset);
offset += meshattribute.attribSizeBytes;
}
//uv滚动初始值设为0
m_LightAni.x = m_LightAni.y = 0;
return true;
}
void FishLayer::draw(Renderer* renderer, const Mat4 &transform, uint32_t flags)
{
if(m_Sprite)
{
//乌龟从右向左移动，移出屏幕后就回到最右边
auto s = Director::getInstance()->getWinSize();
m_Sprite->setPositionX(m_Sprite->getPositionX()-1);
if(m_Sprite->getPositionX() < -100)
{
m_Sprite->setPositionX(s.width + 10);
}
auto glprogramstate = m_Sprite->getGLProgramState();
if(glprogramstate)
{
m_LightAni.x += 0.01;
if(m_LightAni.x > 1.0)
{
m_LightAni.x-= 1.0;
}
m_LightAni.y += 0.01;
if(m_LightAni.y > 1.0)
{
m_LightAni.y-= 1.0;
}
glprogramstate->setUniformVec2("v_animLight",m_LightAni);
}
}
Node::draw(renderer,transform,flags);
}

bool FishLayer::init()
{
         ...省略了不相关的代码。
	// 将vsh与fsh装配成一个完整的Shader文件。
    auto glprogram = GLProgram::createWithFilenames("UVAnimation.vsh", "UVAnimation.fsh");
	// 由Shader文件创建这个Shader
    auto glprogramstate = GLProgramState::getOrCreateWithGLProgram(glprogram);
	// 给精灵设置所用的Shader
    m_Sprite->setGLProgramState(glprogramstate);
	//创建海龟所用的贴图。
    auto textrue1 = Director::getInstance()->getTextureCache()->addImage("tortoise.png");
	//将贴图设置给Shader中的变量值u_texture1
    glprogramstate->setUniformTexture("u_texture1", textrue1);
    //创建波光贴图。
    auto textrue2 = Director::getInstance()->getTextureCache()->addImage("caustics.png");
    //将贴图设置给Shader中的变量值u_lightTexture
    glprogramstate->setUniformTexture("u_lightTexture", textrue2);
    //注意，对于波光贴图，我们希望它在进行UV动画时能产生四方连续效果，必须设置它的纹理UV寻址方式为GL_REPEAT。
    Texture2D::TexParams	tRepeatParams;
    tRepeatParams.magFilter = GL_LINEAR_MIPMAP_LINEAR;
    tRepeatParams.minFilter = GL_LINEAR;
    tRepeatParams.wrapS = GL_REPEAT;
    tRepeatParams.wrapT = GL_REPEAT;
    textrue2->setTexParameters(tRepeatParams);
    //在这里，我们设置一个波光的颜色，这里设置为白色。
    Vec4  tLightColor(1.0,1.0,1.0,1.0);
    glprogramstate->setUniformVec4("v_LightColor",tLightColor);
    //下面这一段，是为了将我们自定义的Shader与我们的模型顶点组织方式进行匹配。模型的顶点数据一般包括位置，法线，色彩，纹理，以及骨骼绑定信息。而Shader需要将内部相应的顶点属性通道与模型相应的顶点属性数据进行绑定才能正确显示出顶点。
    long offset = 0;
    auto attributeCount = m_Sprite->getMesh()->getMeshVertexAttribCount();
    for (auto k = 0; k < attributeCount; k++) {
        auto meshattribute = m_Sprite->getMesh()->getMeshVertexAttribute(k);
        glprogramstate->setVertexAttribPointer(s_attributeNames[meshattribute.vertexAttrib],
                                             meshattribute.size,
                                             meshattribute.type,
                                             GL_FALSE,
                                             m_Sprite->getMesh()->getVertexSizeInBytes(),
                                             (GLvoid*)offset);
        offset += meshattribute.attribSizeBytes;
    }
	//uv滚动初始值设为0
	m_LightAni.x = m_LightAni.y = 0;
	return true;
}
void FishLayer::draw(Renderer* renderer, const Mat4 &transform, uint32_t flags)
{
	if(m_Sprite)
	{
		//乌龟从右向左移动，移出屏幕后就回到最右边
		auto s = Director::getInstance()->getWinSize();
		m_Sprite->setPositionX(m_Sprite->getPositionX()-1);
		if(m_Sprite->getPositionX() < -100)
		{
			m_Sprite->setPositionX(s.width + 10);
		}
		auto glprogramstate = m_Sprite->getGLProgramState();
		if(glprogramstate)
		{
			m_LightAni.x += 0.01;
			if(m_LightAni.x > 1.0)
			{
				m_LightAni.x-= 1.0;
			}
			m_LightAni.y += 0.01;
			if(m_LightAni.y > 1.0)
			{
				m_LightAni.y-= 1.0;
			}
			glprogramstate->setUniformVec2("v_animLight",m_LightAni);
		}
	}
	Node::draw(renderer,transform,flags);
}

从代码15中，我们可以看到先使用OpengGL的API创建自己的Shader,然后再把m_sprite的Shader设置为自己的Shader即“m_Sprite->setGLProgramState(glprogramstate);”，这是给精灵设置所用的Shader，这就是针对个别的精灵，而不是整个图层。接着在draw()中，如果精灵已生成，每次调用draw()函数都改变Shader中参数，以达到特别的效果。
以上都是我通过阅读别人的代码总结的方法，不知道还有没有其他的在Cocos2d-x中自己设置渲染功能的方法，如果有的话，请告诉我，直接在我的博客留言就可以了。

参考资料：

1.http://cn.cocos2d-x.org/article/index?type=wiki&url=/doc/cocos-docs-master/manual/framework/native /wiki/renderer/zh.md

2.http://cocos2d-x.org/wiki/Cocos2d_v30_renderer_pipeline_roadmap

3.http://cn.cocos2d-x.org/tutorial/show?id=1336

4.http://blog.csdn.net/bill_man/article/details/35839499

5.《Cocos2d-x高级开发教程》2.1.4节

6.Cocos2d-x3.2和Cocos2d-x2.0.4源码

如社区发表内容存在侵权行为，您可以点击这里查看侵权投诉指引

标签：

游戏开发 Cocos2dx 渲染 TPS 游戏视觉 OpenGL

首页

出海助力

开发者社区

大奖赛

同行

合作案例

关于我们

Cocos2d-x3.2的渲染流程

第二，RenderCommand的类型。

第三，如何在Cocos2d-x中自己设置渲染功能。